Home
About
News
Product
Case
Contact
Copyright © All Rights Reserved Yangzhou Dinghua Electronics Co., Ltd.
苏ICP备11029078号-1 Powered by www.300.cn
Sales Hotline：
0514-87664485
0514-87662866
0514-87665188
0514-82361988
Fax：0514-87662068
E-mail:sales@cdhe.cn
IMP intelligent multi-wave power supply
IMP intelligent multi-wave power supply
▲Plating power supply
The high-frequency electroplating power supply is built with imported brand-name components and international advanced full-bridge inverter technology. This product has the advantages of small size, high efficiency, stable operation, fine coating and so on. It is widely used in surface treatment industries such as electroplating, electrolysis, oxidation, etc. It is energy efficient, working efficiency is over 90%, and any current and voltage ratio is always linear. Matching, eliminating the voltage regulation and main transformer loss of the traditional rectifier, energy saving is more than 35%, greatly reducing the plating cost.
▲Product performance characteristics
▲Technical Parameters
| Input voltage |
Single phase: 220V ± 10% three-phase 380V ± 10% 50Hz ± 10% |
|
Voltage regulation (CV) |
0—10000V customized according to customer requirements |
|
Current regulation (CC) |
0—3000A customized according to customer requirements |
|
Working temperature |
-15℃～+40℃ |
|
Efficiency (rated power) |
95% |
|
Soft start |
>3S |
|
Transient response time |
4mS |
|
Power factor |
>0.92 (full load) |
|
Display accuracy |
LCD liquid crystal display |
|
Output waveform |
DC square wave |
|
Protection method |
Overcurrent, overvoltage, phase loss, short circuit automatic protection |
|
Way of working |
Long-term full load continuous operation |
|
Insulation withstand voltage |
Input to the chassis (AC1500V / min), input to output (AC1000V / min), output to the chassis (AC500V / min) leakage current <10mA |
|
Insulation resistance |
Input to the outer casing, input to output: DCC000V ≥ 200MΩ output to the outer casing: DC500V ≥ 200MΩ |
|
Control interface |
RS485 or RS232 standard interface |
|
cooling method |
Forced air cooling |
▲Product application range:
It can be used in electroplating, diamond, silver, copper, zinc, nickel, chromium, tin, etc. It can also be used in oxidation, electrolysis, electrophoresis, electroforming, etc., as well as charging, teaching and testing.