• 3
  • 1
  • 2

Copyright © All Rights Reserved  Yangzhou Dinghua Electronics Co., Ltd. 

苏ICP备11029078号-1   Powered by www.300.cn

Sales Hotline:

0514-87664485 
0514-87662866
0514-87665188 
0514-82361988
Fax:0514-87662068
E-mail:
sales@cdhe.cn

DYP magnetic resonance power supply

Page view:
Product name

DYP magnetic resonance power supply

Affiliate classification
没有此类产品
I want to make an inquiry
联系我们
Product description

DYP magnetic resonance gradient power supply
The power supply is designed according to the power supply requirements of the gradient power supply in the MRI equipment. It adopts advanced DSP control technology and PWM pulse width modulation technology. The power supply has the characteristics of fast response, low noise, high power factor and stable and reliable operation. This series of products has been matched with a number of MRI equipment manufacturers and is well received.
The power supply is designed according to the power supply requirements of the gradient power supply in the MRI equipment. It adopts advanced DSP control technology and PWM pulse width modulation technology. The power supply has the characteristics of fast response, low noise, high power factor and stable and reliable operation. This series of products has obtained the CE certification of the European Union and has been well received by many MRI equipment manufacturers. 
Product performance and characteristics
1. Specification range: output voltage 0-500V, output current 0-50A, output power 0-10kW optional (single unit)

2. Stable and steady flow: The voltage and current values can be continuously adjusted from approximately zero to the rated value.
3. Overvoltage protection: When the output voltage exceeds the upper limit voltage set by the power system, the power supply will automatically cut off the output and emit an audible and visual alarm.
4, short circuit protection: short circuit protection and sound and light alarm.
5, overload protection: the power supply has an overload protection circuit inside to prevent the power supply from being damaged due to overload
6, the output display: voltage, current and LED digital tube display (standard)
7. Overvoltage preset function: The overvoltage protection value of the power supply can be preset on the panel, that is, press and hold the overvoltage preset button on the panel to adjust the overvoltage positioner to get the actual overvoltage protection. value.
8, analog signal interface: the user can use 0-5V or 4-20mA signal to control the output voltage and current of the power supply (optional)

Technical indicators

Input voltage

AC single phase 220V ± 10% or AC three phase 380V ± 10% 50Hz ± 10%

Steady steady flow

The voltage and current values can be continuously adjusted from 0-rated value, and the steady state of the steady state state is automatically converted.

Source effect

CV≤0.2% CC≤0.2% (output is the highest voltage, measured at maximum current)

Load effect

CV≤0.2% CC≤0.2%  (The output is the highest voltage, measured at the maximum current)

Ripple voltage

CV≤0.5% CC≤0.6%  (The output is the highest voltage, measured at the maximum current)

Display method

The voltage and current meter is LED digital tube display

display resolution

1V/0.1V/0.01V;  1A/0.1A/0.01A/0.001A

Display error

LED: voltage and current meter ≤ 1% ± 1 word

Short circuit protection

Allow long-term short circuit under certain conditions, but also short circuit protection

Protection method

Overvoltage, overload, phase loss, overheating, IGBT overheat protection

Way of working

Long-term full load continuous work

Environmental conditions

Temperature -20°C-+40°C Humidity ≤80%

responding speed

≤10ms

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article